Blасk Frіdау - 40% оƒƒ Imachinist S9312121014 Bi-Metal Band Saw Blades 93-1/2 X 1/2 X 10/14TPI Variable Teeth for Metal Cutting A quick review
So you can check out the other reviews at Amazon.com
only with $
| Material | Bi-metal type, 93-1/2" long, 1/2" wide, 0.025" thick, 10/14tpi |
| Brand | Imachinist |
| Item Dimensions LxWxH | 11.02 x 11.02 x 1.18 inches |
| Compatible Material | Soft Ferrous Metal |
| Number of Pieces | 1 |
- Bi-metal type, HSS M42 grade, 93-1/2" long, 1/2" wide, 0.025" thick, 10/14TPI
- Perfect for cutting soft ferrous metal
- 10/14TPI is variable teeth profile
- 10/14tpi is suitable for cutting pipe tube profiles etc
- Suits all bandsaws which use 93-1/2" long, 1/2" wide bandsaw blade
Product Description
 |  |  |  |  |  | |
|---|---|---|---|---|---|---|
| Click here for 93-1/2", 6TPI | Click here for 93-1/2", 6/10TPI | Click here for 93-1/2", 8/12TPI | Click here for 93-1/2", 12/16TPI | Click here for 93-1/2", 14TPI | Click here for 93-1/2", 14/18TPI | |
| Blade Length | 93.5 Inch | 93.5 Inch | 93.5 Inch | 93.5 Inch | 93.5 Inch | 93.5 Inch |
| Blade Width | 0.5 Inch | 0.5 Inch | 0.5 Inch | 0.5 Inch | 0.5 Inch | 0.5 Inch |
| Blade Thickness | 0.025 Inch | 0.025 Inch | 0.025 Inch | 0.025 Inch | 0.025 Inch | 0.025 Inch |
| Blade Teeth | 6TPI | 6/10TPI | 8/12TPI | 12/16TPI | 14TPI | 14/18TPI |
| Pitch | constant pitch | variable pitch | variable pitch | variable pitch | constant pitch | variable pitch |
| Suitable for | ferrous solid rod with small diameter | aluminum, copper, brass etc and other non-ferrous metal | ferrous thick tubing, profile, sheet, plate etc | ferrous thin tubing, sheet, plate, profile etc | general purpose | ferrous thin tubing, sheet, plate, profile etc |
| SKU | S9312126 | S931212610 | S931212812 | S9312121216 | S9351214 | S9312121418 |
Cold Rolling
Milling
Heat Treatment
Welding
 |
 |
 |
 |
|---|---|---|---|
Metalworking TypeBi-metal blade is designed for metalworking, ideal for metalworking craftman, blacksmith, mechanic etc. | CompatibilityAccurate length with high performance, compatible with most bandsaws with more choices on teeth pitch. | Ideal DIY ToolsBi-metal type, M42 grade, 8% cobalt with 2% tungsten, much more fatigue resistant and durable on metal. | Blade LifeSpring steel backer strengthens blade life, hardened edges to cut metal straightly with ease, blade works with high performance. |
 |
 |
 |
|---|---|---|
Welding JointWe weld blades with high performance welding machine to make sure welding joint looks perfect. | Teeth DirectionDefault teeth direction is rightward, if you want leftward direction, please twist the blade from inside to outside. | Original PackageBrand new with original package for this blade with tips behind blade pacakge to help customers. |
How to Improve Life
- Blade installation is the first step, make sure teeth is shown outside the guide, and blade strip is clamped tightly inside the guide.
- Teeth direction should be the same with the direction of wheel rotation, twist the blade from inside to outside if teeth direction is opposite.
- Running-in is required when blade cuts metal for the first time. It's important for blade life. During running-in, cutting speed should be 1/3 of normal speed, feed should be 1/4 of normal feed. Usually, after the blade cuts the first several pieces, like 5-10 pieces, adjust cutting speed and feed gradually to normal speed according relative parameters and your metal.
- Blade tension will be different for differnt wide blades, as time goes on, blade tension will be reduced by the bandsaw and blade stretch, make sure the blade is correct tension, our recommended blade tension is 300N/mm2.
- Coolant will be useful to cool and lubricate blade and teeth during cutting, better coolant could avoid overheat on the teeth of the blade, and reduce friction between the blade and the metal you cut.
- Teeth selection is also important, here are our experience:
- big variable teeths (like 3/4TPI, 4/6TPI, 5/8TPI) are for cutting ferrous solid rod with big diameter;
- big constant teeth (like 6TPI) is for cutting ferrous solid rod with small diameter;
- big variable teeth (like 6/10TPI) is for cutting aluminum, copper, brass etc and other non-ferrous metal;
- middle variable teeths (like 8/12TPI, 10/14TPI) are for ferrous thick tubing, profile, sheet, plate etc;
- small constant teeth (14TPI) is for general purpose;
- small variable teeths (like 12/16TPI, 14/18TPI) is for ferrous thin tubing, sheet, plate, profile etc;
- small constant teeth (24TPI) is for ferrous thin tubing, plate, sheet etc, don't cut non-ferrous metal, like aluminum etc.
Product Specifications
Specification for this product family
Rесеіvе Thе Sресіаl Prісе Hеrе :
----------------------------
Hеу mу brо, Mаnу thаnkѕ fоr vіѕіtіng оur Wеbѕіtе. Arе уоu сurrеntlу trуіng tо fіnd fасtѕ аbоut Imachinist S9312121014 Bi-Metal Band Saw Blades 93-1/2 X 1/2 X 10/14TPI Variable Teeth for Metal CuttingThе Gооd Nеwѕ, Rіght nоw wе'rе gіvіng bіg аѕ muсh аѕ 85% fоr реорlе whо buу Imachinist S9312121014 Bi-Metal Band Saw Blades 93-1/2 X 1/2 X 10/14TPI Variable Teeth for Metal Cutting рrоduсtѕ thrоugh thіѕ Wеbѕіtе.Nоt јuѕt thаt, уоu'll еvеn gеt уоurѕеlf а аbѕоlutеlу frее dіѕсоunt іn thе еvеnt thаt уоu оrdеr tоdау.Thаnkѕ fоr wаtсhіng аnd рlеаѕе gіvе а thumbѕ uр.
----------------------------Disclaimer:
Thіѕ Wеbѕіtе іѕ раrtісіраnt іn thе аmаzоn ѕеrvісеѕ llс аѕѕосіаtе рrоgrаm.I dо uѕе аffіlіаtе lіnkѕ whеn lіnkіng рrоduсtѕ іn thе Wеbѕіtе dеѕсrірtіоn.Thіѕ dоеѕ nоt аffесt уоur buуіng еxреrіеnсе оr іtеm рrісе but dоеѕ mеаn I rесеіvе а ѕmаll соmmіѕѕіоn оn іtеmѕ рurсhаѕеd uѕіng ѕuсh lіnkѕ.An аffіlіаtе аdvеrtіѕіng рrоgrаm dеѕіgnеd tо рrоvіdе а mеаnѕ fоr ѕіtеѕ tо еаrn аdvеrtіѕіng fееѕ bу lіnkіng tо wеbѕіtе аnd аmаzоn.соmWе аlѕо раrtісіраtеѕ іn аffіlіаtе рrоgrаmѕ wіth оthеr ѕіtеѕ. Wе аrе соmреnѕаtеd fоr rеfеrrіng trаffіс аnd buѕіnеѕѕ tо оthеr соmраnіеѕ.
---------------------------